HVAC Tips & Buying Guide

Where is the Air Filter in My HVAC System?

HVAC Tips & Buying Guide
Where is the Air Filter in My HVAC System?

Tips for locating the air filter based on your type of HVAC system

Bravo for wanting to change your air filter! That’s the first step to improving the air quality in your home, helping your HVAC system run more efficiently and saving money on energy costs.

The next step can be trickier — finding the air filter. It may be difficult to locate on some HVAC systems, but you can usually find the air filter in the return air duct. Or in layman’s terms, that big metal grate on your wall, floor, ceiling or utility closet door. Return air ducts can be just about anywhere.

Unlike the smaller ducts around your home, the return air duct or blower compartment pulls in the air from your home and sends it to your HVAC unit to be heated or cooled. It’s important to have a good air filter installed to trap allergens and other irritants, so they don’t get circulated around your home.

Here are some of the most common locations for an HVAC air filter.

 

 

  • Horizontal HVAC units
    Horizontal units are frequently located in attics, large basements or garages. The filter usually fits in a slot on the air return side of the unit.
  • Vertical HVAC units
    These systems are usually found in smaller basements or crawl spaces where space is limited. The filter typically slides into a slot above or below the HVAC unit.
  • Other HVAC systems
    For any other kind of system, look for the air filter behind the return air grill on the wall, ceiling or utility closet door.

Don’t forget, some HVAC systems have a return in each room. So there may be an air filter behind each of those return grills.

Finding your air return ducts can be a bit like a scavenger hunt. But it’s worth the effort to walk around your entire house, looking high and low. Be sure to check behind doors and other hidden places, so you don’t miss one.

5 Air Conditioning Myths That Are Costing You Money

HVAC Tips & Buying Guide
5 Air Conditioning Myths That Are Costing You Money

Don’t waste your energy on these common beliefs

Want to save money on your air conditioning expenses and energy bills? Then don’t buy into these common A/C myths.

  1. MYTH: The Size of Your A/C Unit Isn’t Important

FACT: The size of your HVAC unit depends on the size of your space. A too-small air conditioning system will have to work harder to cool your home and wear down sooner. A too-large system will keep turning off and on until it breaks down. Check with a specialist who can help you choose the right size HVAC unit for your home.

  1. MYTH: Turn the Temperature Down for Quicker Cooling

FACT: Your air conditioning unit works just as hard whether you lower it 3 degrees or 30 degrees — getting to the temperature you want is just a matter of time. If you set it lower than you need to and forget about it, you’ll end up paying a higher bill. Try using a programmable thermostat or smart thermostat to save money and get the temperature you actually want.

  1. MYTH: You Don’t Need to Change the Air Filters

FACT: You may vacuum your home on a regular basis, but it’s still important to check your air filters. Air filters are typically inexpensive and can save you money on repair costs and your electric bill in the long run. If you have trouble finding your air filter or replacing it, call a specialist to help you with replacement every 30-90 days.

Air Conditioners

  1. MYTH: Run Your HVAC System Until It Quits

FACT: You’ll often hear this myth regarding cars, but it applies to HVAC units, too. Replacing an air conditioner might be more expensive up front, but running your unit past its expiration date will be less efficient and cost you money in the long run on repairs. Start saving money on your energy bills sooner by replacing your old unit before it quits on you.

  1. MYTH: Maintenance Doesn’t Matter

FACT: Broken units are inefficient units, so keep your HVAC unit performing at its peak. What might seem like a minor issue now could become an expensive one later if you don’t repair it.

5 Common Myths About Furnaces That Aren’t True

HVAC Tips & Buying Guide
5 Common Myths About Furnaces That Aren’t True

We’re putting some heat on these winter furnace myths

Cooler weather doesn’t have to mean higher heating bills. Don’t fuel the fire of bad information— save your furnace and your wallet by separating fact from fiction.

  1. FICTION: Close Your Vents to Close Off Heat

FACT: It almost feels like common sense to close the vents to rooms you don’t need to be heated, but your furnace distributes heat equally throughout your home no matter what. Closing the vents to unused rooms only makes your furnace work harder and less efficiently— keep them open to keep air flowing freely.

  1. FICTION: It’s Normal to Have Cold Feet

FACT: Having cold floors in the winter means your home isn’t well-insulated, allowing the hot air you pay for to get out. Check the sealing around doors and windows, or hire a professional to properly seal your home so you can walk around comfortably.

  1. FICTION: All You Need is Efficiency

FACT: Having an efficient system is important if you’re trying to lower your bills, but it doesn’t mean anything if your home isn’t optimized for heating. Aside from checking your insulation around doors and windows, contact an HVAC expert to inspect ductwork, fix leaks and keep the warm air inside.

  1. FICTION: Run Your System Into the Ground

FACT: If your old furnace is breaking down, you might be tempted to just replace the bad parts until it finally quits. Replacing a furnace may seem expensive up front, but creating a frankenfurnace only causes your old system to work less efficiently and drive up your power bills. Find a new winter furnace that runs on less energy and fits your family’s budget.

 

  1. FICTION: Maintenance Isn’t Mandatory

FACT: Don’t let small problems turn into large bills. Regular maintenance is necessary to keep your furnace in top shape.

5 Common Misconceptions About Heat Pumps

HVAC Tips & Buying Guide
5 Common Misconceptions About Heat Pumps

Don’t waste time or money believing the biggest heat pump myths

Heat pumps purchases are on the rise with smart homeowners looking toward more energy-efficient options, but there’s a lot of misinformation surrounding these versatile heating and cooling systems. Let’s clear the air with these heat pump facts, so you can make your home and monthly energy bills more comfortable.

  1. MISCONCEPTION: Heat Pumps Are Only for Heating

 TRUTH: Although people typically think of heating when it comes to heat pumps, names can be misleading. Heat pumps use a mechanical-compression refrigeration system that can either heat or cool your home depending on the season. This means you only need one system year-round to maintain a comfortable temperature indoors.

heat pump

  1. MISCONCEPTION: They’ll Burn a Hole in Your Wallet

 TRUTH: Heat pumps can help you save over 30% on your energy bill, compared to other conventional heating systems. While the upfront cost may be more than other options, an efficient heat pump paired with proper insulation will save you money in the long run.

  1. MISCONCEPTION: You’ll Need Earplugs Indoors

TRUTH: Heat pumps used to be pretty noisy, but modern air pump technology has evolved into much quieter systems. As long as your heat pump is properly installed by a professional, you shouldn’t have any issues with excess noise.

  1. MISCONCEPTION: Cold Climate Means Cold Home

 TRUTH: One of the biggest misconceptions about heat pumps is that they only work in more temperate climates — not true. Most efficient heat pumps, like Trane systems with their Climatuff™ Variable Speed Compressor, can handle temperatures as low as 0 degrees Fahrenheit for average-sized homes.

  1. MISCONCEPTION: Their Lifespan is Limited 

TRUTH: Rumor is that heat pumps burn out quicker because they run year-round. The reality is that as long as your heat pump is properly maintained, high-quality models will last at least 15-20 years.

Why isn’t my heat working? Heating problems answered

HVAC Tips & Buying Guide
Why isn’t my heat working? Heating problems answered

Prepare for cooler weather with answers to the most common heating system questions

Fall is finally here. A time for pumpkin spice everything, festivals and crisp days and cool nights. Fall is also the first time most of us turn our heat on. What should you do if it doesn’t work? We’ve got troubleshooting tips for this and more common heating questions. Mom and son keeping warm under a blanket near a furnace

Shutterstock Photo By Lens Candy

Why isn’t my heat working?

ANSWER: The circuit breaker might have been tripped. Try resetting it.

ANSWER: Your thermostat may not be calibrated properly or set too low. Make sure your thermostat is set to heat. Try setting the temperature 2 to 4 degrees above room temperature.

ANSWER: Clean or replace your filters. Whether you have a gas or oil furnace or a heat pump, filters need to be routinely cleaned or replaced. You can use the owner’s manual to find where the air and oil filters are located in your unit.

ANSWER: The pilot light may be out or the gas turned off. If you have a gas furnace, make sure the gas line is switched on. If the main gas line is turned off, you’ll need to have your local gas company check. If you have an older gas furnace (before 1990), one of the first things to check is your pilot light. Your owner’s manual will feature detailed instructions on re-lighting the pilot. Contact your local Trane Comfort Specialist™ if you’re unsure. 

Why is it hot upstairs and cold downstairs?

ANSWER: Heat is escaping. Create climate zones to heat the rooms you want. The DIY way to do this is to close a few (not all) vents on the second floor. This forces your heating system to direct more air downstairs. Take this concept to the next level by having an HVAC professional install a climate zone system, like the Trane ComfortLink™ II Zoning System. In this system, heated or cooled air is directed where it’s needed most.

ANSWER: Your insulation and weather strips need to be replaced. As you know, heat rises and cold air collects on the ground level. So any cold air that enters through drafty doors and windows is going to be felt most downstairs. It’s a simple fix that can make a noticeable difference.

Why is the air flow so low?

ANSWER: Clean or replace your filters. Over time, dust and dirt will accumulate on the filter screen. There could also be a blockage in your air ducts. If this is the case, you’ll need your local Trane Comfort Specialist™ to inspect the ductwork.

Why is my utility bill so high?

ANSWER: Your system is running too much. If you have your thermostat set to a temperature drastically warmer than the outside temperature, your system has to work harder to maintain the temperature. This can result in a higher-than-normal utility bill. Try adjusting your thermostat to a more moderate temperature.

ANSWER: Your rates may have been raised. Your utility company might have raised their rates. Contact your utility company and compare the rates on your current bill with those from previous months.

Smart Heating & Cooling: Trane ComfortLink™ Technology

HVAC Tips & Buying Guide
Smart Heating & Cooling: Trane ComfortLink™ Technology

Boost your at-home comfort and energy efficiency with Trane HVAC zoning and connected controls

Looking for a heating and cooling system that adapts to your lifestyle? Trane ComfortLink™ Technology gives you total control of your home’s comfort and helps you save on energy costs.

That’s because it’s more than just a smart thermostat. Our innovative ComfortLink™ tech works together in a streamlined system to optimize efficiency, maintain even cooling and heating temperatures and let you make adjustments from wherever you are. Ready to make your life easier? Here’s how to do it with Trane connected controls.

 

The Trane ComfortLink™ II Command Center

It’s all starts with a state-of-the-art thermostat and zoning control system like the Trane ComfortLink™ II XL1050 with built-in Nexia™ Bridge. This is your zoning and automation hub that lets you remotely control your home, comfort and energy use. Making adjustments is easy from your smartphone, tablet or computer.

3 BIG BENEFITS

  1. Monitor your home: A network of sensors monitors and optimizes the humidity and temperature in your home, adjusting compressor and fan speeds in real time to give you the most comfortable air operating efficiency possible.
  2. Take control: Trane’s connected controls with built-in Nexia™ Bridge combine zone-by-zone comfort control with a smart home hub that connects to a variety of smart devices.
  3. Run real-time diagnostics: Nexia™ can monitor your HVAC system diagnostics in real time and alert your Trane dealer if there’s an issue. You even have the option to set it up so your dealer can troubleshoot by remotely viewing details on how your heating and air conditioning system is performing.

The ComfortLink™ II HVAC Zoning System

Trane’s innovative ComfortLink™ II Zoning System lets you send heated or cooled air exactly where you need it, when you need it. You’ll get steady, precise comfort on demand, room by room or zone by zone.

Set a schedule based on your home’s unique temperature patterns and control it from wherever you are with our exclusive Nexia™ system. Every ComfortLink™ Control comes with remote climate access, so you can monitor and control your zoning system through any web-enabled device.

ZONING COMPONENTS

  • Trane ComfortLink™ II Control: This is the heart of your zoning system. It’s more than a thermostat — it’s an easy-to-use advanced command center that provides a seamless interface between your system and your life.
  • Wired Zone Thermostat/Sensors: These work as both a sensor and a zone thermostat. Temperature data is relayed to the Trane ComfortLink™ II Control so it can adjust the temperature in each individual zone.
  • Motorized Modulating Dampers: Our exclusive motorized modulating dampers work inside your ductwork by opening and closing in partial increments so you can fine-tune zoned areas for maximum comfort.

A Perfect Match

Experience ultimate comfort when you connect your Trane ComfortLink™ II Control and zoning equipment to a perfectly matched Trane variable-speed indoor unit and multi-stage outdoor unit. Every component is designed to work in harmony with the others — optimizing your indoor temperature and energy use. It also provides enhanced humidity control you’ll only find with a Trane matched system.

Trane’s Best Heat Pump

HVAC Tips & Buying Guide
Trane’s Best Heat Pump

SEE OUR TOP-RATED HEAT PUMPS IN THE CATEGORIES THAT MATTER TO YOU MOST: ENERGY EFFICIENCY, QUIET OPERATION, AND VALUE

If you’re looking for a new heat pump, the first thing you need to do is identify what features matter to you most. Do you want the best value? Do you want the most energy efficient? Or maybe a bit of both?

Trane Heat Pump

In order to make your choice a little easier, we’ve identified the heat pump that performs the best in three important categories: energy efficiency, quiet operation and value. We’ll explain what those categories mean and explain how our best heat pumps perform so you can make the best decision for you and your family.

Heat pump features you need to know

The technical terms and features of heat pumps can feel like a foreign language. Even if you begin to understand them, how do you know what features are right for your home? Honestly, your best resource for a thorough understanding of the latest equipment and what your home needs is your local HVAC specialist. However, there are a few basics you should know.

  • Energy Efficiency – Don’t let the name fool you, heat pumps actually heat your home in the winter and cool your home in summer. Because of this, heat pumps are rated for their energy usage in two ways – HSPF for heating and SEER for cooling. Heating Seasonal Performance Factor (HSPF), is the ratio for the efficiency of heat pumps. Seasonal Energy Efficiency Ratio (SEER), measures the energy efficiency of air conditioners. These usually range from 13-22. A higher rating means better efficiency. Greater energy efficiency can translate into lower monthly energy costs. Keep in mind: An HSPF > 8 is considered high efficiency. Higher SEER rating = better efficiency.
  • Sound Level – When space is limited or in cities with strict noise standards, having a quiet running heat pump is a priority. In heat pumps, moving parts like fans and cabinet insulation can reduce noise levels. Many units are rated with a Nominal Sound Level – the average sound level in decibels. The higher the number, the louder the unit. For example:
    40 = A library
    70 = A vacuum cleaner at 10 ft.
    43 = Our quietest heating and cooling systems
  • Value – When we say best value, that doesn’t mean it’s the lowest price. At Trane, we define value by identifying the heat pump that delivers a high efficiency rating and includes many of our industry leadinginnovations, but is more affordable than our most advanced units. In short, a quality product that won’t break your budget.

Most Efficient Heat Pump – Trane XV20i

Trane XV20i Heat pump

The XV20i heat pump has the highest efficiency rating of all our heat pumps with a SEER rating of 20 and an HSPF of 10. With that level of energy efficiency, customers can possibly save an average of over $500 each year in energy costs*. Our most efficient heat pump is Energy Star Qualified and includes our patented TruComfort™ variable-speed system and integrated communicating technology to keep your home at an optimal temperature and avoid spikes that lead to increased energy consumption.

Quietest Heat Pump – Trane XV19 low profile

Trane XV19 low profile heat pump

The Trane XV19 low profile heat pump checks in with sound levels starting as low as 43 dBA – making it the quietest system in our lineup. It includes innovative sound insulators and a unique integrated fan system with a leading edge swept fan design to reduce noise levels. XV19 is also Energy Star Qualified with a SEER rating up to 19.5 and an HSPF of up to 12 – making it a great combination of energy efficiency and quiet operation.

Best Value Heat Pump – Trane XR15

 

Trane XR15

We’ve identified the Trane XR15 as our best value heat pump because of its high efficiency ratings and more affordable price point. With high-efficiency SEER rating of 16 and a high-efficiency HSPF of 9.50, you can expect to see noticeable energy savings when you replace an older, less efficient unit.

Trane's Best Furnaces

HVAC Tips & Buying Guide
Trane's Best Furnaces

Find out which furnace ranks #1 in these key categories: Most Efficient, Quietest, and best Value.

Finding the best furnace for your home can be difficult. It really comes down to knowing what features matter to you most. Do you want the best value? Do you want the most energy efficient? Or maybe a bit of both?

Trane Furnace in 150 degree heat testing lab.

In order to make your choice a little easier, we’ve identified the furnace that performs the best in three important categories: energy efficiency, quiet operation and value. We’ll explain what those categories mean and highlight how our best furnaces perform so you can make an informed decision.

Furnace features you need to know

The technical terms and features of furnaces can feel like a foreign language. Even if you begin to understand them, how do you know what features are right for your home? Honestly, your best resource for a thorough understanding of the latest equipment and what your home needs is your local HVAC specialist. However, there are a few basics you should know.  

  • Energy Efficiency – Furnaces, like air conditioners and any other home appliance, consume energy to work. Some furnaces use less energy than others to get the same results. A furnace AFUE rating can help you tell the difference.  Annual Fuel Utilization Efficiency (AFUE) is a measure of a gas furnace’s efficiency in converting fuel to energy. A higher AFUE means greater energy efficiency. Greater energy efficiency can translate into lower monthly energy costs. Keep in mind: Standard efficiency = 80% AFUE. High efficiency = 90% AFUE and above.
  • Sound Level – For residential areas with strict noise level standards or if space is limited, having a quiet running furnace can be key. In furnaces, moving parts like blower motors, fans as well as cabinet insulation quality can limit noise. Many units are rated with a Nominal Sound Level – the average sound level in decibels. The higher the number, the louder the unit. For example:
    40 = A library
    70 = A vacuum cleaner at 10 ft.
    45 = Our quietest heating and cooling systems
  • Value – We don’t define best value as our lowest priced unit. At Trane, we define value by identifying the furnace that delivers a high-efficiency rating and updated features but is more affordable than our most advanced units. Think of these like Goldilocks – not too high, not too low – just right.

Most Efficient Furnace – Trane XC95M

Trane XC95M

The XC95M gas furnace has the highest AFUE rating in our family of products at 97.3%. With that level of energy efficiency, customers can possibly save up to 38% per year in energy costs*. Our most efficient furnace is Energy Star Qualified and includes a variable-speed blower motor and communicating technology to constantly calibrate and keep your home at an optimal temperature and avoid spikes that lead to increased energy consumption.

Quietest Furnace – Trane S9V2-VS

Trane S9V2-VS

The Trane S9V2-VS gas furnace includes our patented Vortica II blower and a heavy steel insulated cabinet to help it run quietly. The S9V2-VS is also Energy Star Qualified with an AFUE rating of 97% – making it a great combination of energy efficiency and quiet operation.

Best Value Furnace – Trane XB90

Trane XB90

We’ve identified the Trane XB90 gas furnace as our best value furnace because it checks all the boxes for efficiency and quality at a more affordable price point. With a 92% AFUE rating, the XB90 qualifies as a “high efficiency” furnace. So if you’re replacing an older, standard or lower rated unit, you can still see noticeable energy savings.

Trane's Best Air Conditioners

HVAC Tips & Buying Guide
Trane's Best Air Conditioners

We’ve identified the 3 air conditioners that perform the best in 3 key categories: Most Efficient, Quietest and Best Value.

If you’re looking for an air conditioner, the first thing you need to do is identify what features matter to you most. Do you want the best value? Do you want the most energy efficient? Or maybe a bit of both?

Trane Air Conditioner in cold testing lab covered in ice and frost

In order to make your choice a little easier, we’ve identified the air conditioner that performs the best in three important categories: energy efficiency, quiet operation and value. We’ll explain what those categories mean and explain how our best air conditioners perform so you can make the right decision for you and your family.

Air conditioner features you need to know

Honestly, your best resource for a thorough understanding of the latest equipment and what your home needs is your local HVAC specialist. However, there are a few key terms and features you should know when shopping for a new air conditioner.

  • Energy Efficiency – Air conditioners, like any other home appliance, consume energy to work. Some just happen to use less energy than others to get the same results. The Seasonal Energy Efficiency Ratio (SEER), measures the energy efficiency of air conditioners so you can easily compare the energy efficiency of different air conditioners. SEER ratings usually range  from 13-22. A higher rating means better efficiency. Greater energy efficiency can translate into lower monthly energy costs. Air conditioner standards: 16 SEER and above = High efficiency, 13 SEER is the minimum allowed in Northern areas, and 14 SEER is the minimum allowed in Southeastern and Southwestern areas
  • Sound Level – When space is limited or in cities with strict noise standards, having an air conditioner that won’t wake the neighbors is important. In air conditioners, moving parts like fans and motors as well as cabinet insulation can reduce noise levels. Many units are rated with a Nominal Sound Level – the average sound level in decibels. The higher the number, the louder the unit. For example:
    40 = A library
    70 = A vacuum cleaner at 10 ft.
    43 = Our quietest heating and cooling systems
  • Value – The important thing to know about our best value air conditioner is that it isn’t going to be our lowest priced unit. At Trane, we define best value to mean the air conditioner delivers a high efficiency rating and includes many of our industry leading innovations, but is more affordable than our most advanced unts. In short, a quality product that won’t break your budget.

Most Efficient Air Conditioner – Trane XV20i

Trane XV20i Air Conditioner

The XV20i air conditioner has the highest efficiency rating in our family of products at up to 22 SEER. With that level of energy efficiency, customers can possibly save up to 64% each year in energy costs*. The XV20i is Energy Star Qualified and includes our patented TruComfort™ variable-speed system and integrated communicating technology to keep your home at an optimal temperature and avoid spikes that lead to increased energy consumption.

Quietest Air Conditioner – Trane XV18

Trane XV18 Air conditioner

The Trane XV18 air conditioner has a sound level starting as low as 57 dBA – 4 dB below the competition. It includes innovative sound insulators and a unique integrated fan system with a blade-down fan design that improves airflow and reduces sound levels. XV18 is also Energy Star Qualified with a SEER rating up to 18 – making it a great combination of energy efficiency and quiet operation.

Best Value Air Conditioner – Trane XR14

Trane XR14 Air Conditioner

We’ve identified the Trane XR14 as our best value air conditioner because of its high efficiency ratings and more affordable price point. With a SEER rating of up to 16, you can expect to see noticeable energy savings when you replace an older, less efficient unit.

6 Ways to Prepare Your A/C for Storms

HVAC Tips & Buying Guide
6 Ways to Prepare Your A/C for Storms

Smart steps to protect your air conditioner during hurricanes and summer storms

If you’re anxious about the Atlantic hurricane season (June 1 – November 30) or just wary of summer storms, it’s wise to protect your HVAC system from whatever weather blows through this season.

Storms don’t just bring rain and wind. They also cause power outages that can leave you without the comfort of your air conditioning and other home appliances for hours or days. Check out Ready.gov for ways to prepare your entire home for bad weather. Be sure to take special care with your A/C system, so you can stay cool between storms.

Protecting Your Air Conditioner

Below are 6 steps you can take before, during and after a storm to minimize damage to your air conditioner and get it up and running faster when the power comes back on.

  1. Pre-cool your home. If you think your power may go out during a storm, go ahead and cool your home in advance so you can stay comfortable until power is restored. Set your thermostat to a cooler setting than usual, close curtains and blinds and keep doors and window shut to keep the cold air inside.
  2. Turn off electricity to your air conditioner. Electrical surges from lightning strikes during the storm can damage your A/C unit. There’s also a chance that debris could get stuck in your outdoor unit and burn out the motor. Play it safe by shutting off power to your A/C system. We recommend you turn off power from your thermostat and circuit breaker.
  3. Cover your outdoor A/C unit. This step is only really necessary if you’re expecting a hurricane and high winds. After you’ve turned off your air conditioner, cover it with a tarp or plywood to protect it from flying debris. High winds can knock down branches and trees that could damage your unit if they land on it. Be sure to remove the covering as soon as it’s safely possible. Keeping your unit covered too long can trap moisture which leads to mold and mildew.
  4. Secure the unit. If you have an elevated air conditioner on a second story, be sure to secure your outdoor condenser unit with hurricane straps to keep it in place during strong wind gusts. If your area is prone to flooding, you may want to get an HVAC professional to elevate your unit for better protection.
  5. Check for damage before you turn your air back on. This is one of the most important steps. Don’t forget to assess the storm damage before you turn your system back on. Flooding or flying debris could have damaged your unit and turning it on can make the problem worse. Also, storm winds many cause disconnections within your AC unit, which could lead to toxic refrigerant leaks. Do turn your A/C on as soon as it seems safe. This will keep mold and mildew from settling in.

5 Simple Steps to Protect Your Home From a Hurricane

In addition to protecting your air conditioner, there are a few simple steps you can take to help protect your home. Please note, these suggestions do not mean you or your home will be “safe” during a severe storm. Please follow weather advisories and evacuate the area when recommended by local officials

  1. Brace your garage door. If heavy winds break down your garage door and get into your garage, it’s easier for the whole roof to be ripped off.
  2. Securely fasten windows and doors. Protect your home from broken glass and flying debris by ensuring all doors and windows are locked. Many homes in hurricane-prone areas have window, porch and door protection systems for added security.
  3. Trim surrounding trees. Keep an eye out for dead limbs or overhanging trees on your property and remove them before they can cause damage in a heavy storm. Other loose objects around your yard like patio furniture and grills should also be secured.
  4. Unplug appliances or invest in a surge protector. In a severe storm, electrical surges are a very real possibility and can do a lot of damage to your expensive kitchen appliances and home entertainment systems.
  5. Protect your home from flood damage. If possible, move your car to higher ground and move valuables off the floor. Most importantly, make sure you have the proper flood insurance and an updated home inventory to make any future property claims easier.
Subscribe to HVAC Tips & Buying Guide

Need Help?

Give us a call
Trane
Complete Heating & Cooling System from $109.99/mo

Includes: up to 5 ton AC, Cooling Coil, 80% AFUE Furnace and Thermostat. All Repairs & Service - No Charge EVER. No money down with approved credit.

Get Discount
Schedule Service Today
Schedule Your Free Estimate